Packed in-tube solid phase microextraction with graphene oxide supported on aminopropyl silica: Determination of target triazines in water samples

On-line in-tube solid phase microextraction (in-tube SPME) coupled to high performance liquid chromatography and tandem mass spectrometry (HPLC-MS/MS) was successfully applied to the determination of selected triazines in water samples. The method based on the employment of a packed column containing graphene oxide (GO) supported on aminopropyl silica (Si) showed that the extraction phase has a high potential for triazines extraction aiming to its physical-chemical properties including ultrahigh specific surface area, good mechanical and thermal stability and high fracture strength. Injection volume and loading time were both investigated and optimized. The method validation using Si-GO to extract and concentrate the analytes showed satisfactory results, good sensitivity, good linearity (0.2–4.0 µg L^?1) and low detection limits (1.1–2.9 ng L^?1). The high extraction efficiency was determined with enrichment factors ranging from 1.2–2.9 for the lowest level, 1.3–4.9 intermediate level and 1.2–3.0 highest level (n = 3). Although the analytes were not detected in the real samples evaluated, the method has demonstrated to be efficient through its application in the analysis of spiked triazines in ground and mineral water samples.     

In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

Biogenic palladium prepared by activated sludge microbes for the hexavalent chromium catalytic reduction: Impact of relative biomass

• Pd nanoparticles could be reduced and supported by activated sludge microbes. • The effect of biomass on Pd adsorption by microbes is greater than Pd reduction. • More biomass reduces Pd particle size, which is more dispersed on the cell surface. • When the biomass/Pd add to 6, the catalytic reduction rate of Cr(VI) reaches stable. Palladium, a kind of platinum group metal, owns catalytic capacity for a variety of hydrogenations. In this study, Pd nanoparticles (PdNPs) were generated through enzymatic recovery by microbes of activated sludge at various biomass/Pd, and further used for the Cr(VI) reduction. The results show that biomass had a strong adsorption capacity for Pd(II), which was 17.25 mg Pd/g sludge. The XRD and TEM-EDX results confirmed the existence of PdNPs associated with microbes (bio-Pd). The increase of biomass had little effect on the reduction rate of Pd(II), but it could cause decreasing particle size and shifting location of Pd(0) with the better dispersion degree on the cell surface. In the Cr(VI) reduction experiments, Cr(VI) was first adsorbed on bio-Pd with hydrogen and then reduced using active hydrogen as electron donor. Biomass improved the catalytic activity of PdNPs. When the biomass/Pd (w/w) ratio increased to six or higher, Cr(VI) reduction achieved maximum rate that 50 mg/L of Cr(VI) could be rapidly reduced in one minute.     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

Glucose production from hydrolysis of cellulose over a novel silica catalyst under hydrothermal conditions

A novel silica catalyst was synthesized by evaporation-induced self-assembly (EISA) method and tested for the catalytic selective hydrolysis of cellulose to glucose. This silica catalyst exhibited a higher catalytic activity than other oxides prepared by the same method, such as ZrO₂, TiO₂, and Al₂O₃. Using silica as a catalyst, cellulose was selectively hydrolyzed into glucose with a glucose yield as high as 50% under hydrothermal conditions without hydrogen gas. The silica catalyst was characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of temperature-programmed desorption of ammonia (NH₃-TPD) and textural properties indicated that the synergistic effect between strong acidity and a suitable pore diameter of the silica catalyst may be responsible for its high activity. In addition, the catalyst was recyclable and showed excellent stability during the recycle catalytic runs.     

新型磁性聚谷氨酸吸附剂对水中Pb2+的吸附去除

德岛大学安澤幹人首次利用γ-PGA在Fe3O4磁性纳米颗粒上进行涂层,制得了γ-聚谷氨酸-Fe3O4磁性纳米颗粒（PG-M）.本实验利用透射电镜以及扫描电镜对PG-M吸附剂的形貌进行了分析,发现PG-M与未涂层的Fe3 O4具有相似的形状以及大小,均为不规则的层状结构,且晶粒直径在120～320 nm之间;实验中针对性地对水溶液中Pb2＋进行了吸附探讨.在振荡实验中,通过主要参数的变化（pH值、吸附时间、竞争离子浓度、腐殖酸浓度）,得到如下结果：吸附最佳pH值为7.0;吸附量随着吸附时间的延长而增长,吸附平衡时间为45 min;Na＋对PG-M去除Pb2＋没有很强的干扰性,而Ca2＋则显示出一定的干扰作用;腐殖酸对吸附效果的影响是复杂的,表现为先增强吸附效果,随后降低吸附效果;最佳条件时Pb2＋的最大吸附量为93.3 mg/g.PG-M对Pb2＋的吸附均能较好地符合Freundlich和Langmuir等温吸附模型,其中Langmuir方程能更好地描述PG-M的吸附特征,说明PG-M在水溶液中对金属离子的吸附为单分子层吸附.PG-M吸附符合准二级动力学模型（r2〉0.99）.不同浓度的HCl和HNO3溶液的再生实验发现,0.1 mol/L的HCl溶液作为吸附再生液,可取得较好的再生效果.表明PG-M是可再生的,具有较好的经济性和可持续性.     

Effects of silica nanoparticles on growth and photosynthetic pigment contents of Scenedesmus obliquus

To assess the aquatic ecosystem safety for silica (SiO2) nanoparticles (NPs), the growth inhibition and photosynthetic pigment contents of Scenedesmus obliquus in logarithm growth phase exposed to SiO2 NPs and SiO2 bulk particles (BPs) suspensions were measured. SiO2 NPs with 10-20 nm diameters were found to be toxic. The 20% effective concentration (EC20) values for 72 and 96 hr were 388.1 and 216.5 mg/L, respectively. The contents of chlorophyll decreased significantly under moderate and high concentratio...     

Selective removal of 2,4-dichlorophenoxyacetic acid from water by molecularly-imprinted amino-functionalized silica gel sorbent

A molecularly-imprinted amino-functionalized sorbent for selective removal of 2,4-dichlorophenoxyacetic acid(2,4-D) was prepared by a surface imprinting technique in combination with a sol-gel process.The 2,4-D-imprinted amino-functionalized silica sorbent was characterized by FT-IR,nitrogen adsorption and static adsorption experiments.The selectivity of the sorbent was investigated by a batch competitive binding experiment using an aqueous 2,4-D and 2,4-dichlorophenol(2,4-DCP) mixture or using an aqueous 2...     

含氚硅胶密封包装实验研究

文章针对含氚硅胶,设计了双层桶密封包装容器,即以镀膜铝桶为初始包装,内衬高密度聚乙烯(HDPE)不锈钢桶为外包装容器。含氚硅胶在镀膜铝桶内用环氧树脂浇注固定,密封;铝桶放入衬HDPE不锈钢外桶,间隙蛭石填充,垫圈密封。含氚硅胶包装桶氚释气率测量结果表明,20天内日均释氚率为4.62×10-5%;浸出实验结果表明,108天内氚日均浸出率远小于10-3%,满足氚废物包装的相关要求。     

崇明东滩海三棱藨草生物硅分布及季节变化

利用Na2CO3连续提取法,分析了崇明东滩海三棱藨草(Scirpus mariqueter)体内生物硅(BSi)含量与分布特征.结果表明,BSi在海三棱藨草体内的分布存在明显的季节变化差异,在生物体中连续积累是BSi的一个主要特征.地上部分BSi含量变化范围为0.26% ~ 0.93%,地下部分为0.31% ~ 0.92%,果实中则为0.24% ~0.43%.地上部分含量明显高于其他部分,说明BSi主要沉积在蒸发强烈的叶片中,植株个体生长阶段是决定地上部分BSi含量的主要因素.统计分析显示,根际沉积物BSi和植物各器官BSi相关性均显著,说明海三棱藨草依从主动吸硅机制,从根际沉积物获取所需的Si.地上、地下部分BSi含量与有机氮(ON)、C/N、土壤温度、植株高度也存在明显的相关性.